Excel在真空计量中的应用

在真空计量领域中，Ｅｘｃｅｌ电子表格软件得到了广泛的应用。本文举例说明了Ｅｘｃｅｌ的数据计算，统计分析，回归分析，宏、ＯＬＥ和ＤＤＥ功能。     

超音速射流气膜冷却效果的试验研究

以二维平板模型高速导弹头罩上的探测窗口，用电加温产生的热气流模拟导弹飞行时的气动加热，对采用气膜邓控制导弹探测窗口温度的效果及规律进行了研究。着重探讨了气膜冷却临界长度ＬＣ与气膜冷却有效度η随射流缝高Ｓ，喷射率λ及主射流夹角α等参数的变化规律，并总结出一个相关参数及一些经验公式。研究结果与国外有关文献基本一致。     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

A salient edges detection algorithm of multi-sensor images and its rapid calculation based on PFCM kernel clustering

Multi-sensor image matching based on salient edges has broad prospect in applications, but it is difficult to extract salient edges of real multi-sensor images with noises fast and accurately by using common algorithms. According to the analysis of the features of salient edges, a novel salient edges detection algorithm and its rapid calculation are proposed based on possibility fuzzy C-means （PFCM） kernel clustering using two-dimensional vectors composed of the values of gray and texture. PFCM clustering can overcome the shortcomings that fuzzy C-means （FCM） cluster- ing is sensitive to noises and possibility C-means （PCM） clustering tends to find identical clusters. On this basis, a method is proposed to improve real-time performance by compressing data sets based on the idea of data reduction in the field of mathematical analysis. In addition, the idea that kernel-space is linearly separable is used to enhance robustness further. Experimental results show that this method extracts salient edges for real multi-sensor images with noises more accurately than the algorithm based on force fields and the FCM algorithm; and the proposed method is on average about 56 times faster than the PFCM algorithm in real time and has better robustness.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

不同湍流模型对插板式进气畸变的数值模拟

为得出一种较为准确的湍流模型,应用三种湍流模型对插板式进气畸变进行数值模拟,通过与畸变实验实测数据的对比,研究不同湍流模型在插板式进气畸变计算中的预测能力。不同湍流模型计算出的出口流场畸变不同,重整化群k-ε模型得出高压区范围较大,S-A模型过渡区域范围大。结果表明:插板高度为畸变发生器内径的48%时,低压区范围角与实验值较为吻合,插板高度为畸变发生器内径的20%时,低压区范围角偏小。畸变指数的计算值以可实现化k-ε模型最为准确。     

弹塑性梯度材料热机耦合分析的有限元方法

陶瓷/金属功能梯度材料(FGMs)的组份及性能梯度分布,在航空航天高温热结构中有重要应用。材料性能在空间上的连续变化给这类结构强度设计的有限元分析造成了一定困难,针对上述问题,提出一种热弹塑性梯度有限元方法。该方法通过编写有限元软件ABAQUS的材料用户子程序(UMAT)来实现,在UMAT中将FGMs的弹塑性本构模型参数定义为空间坐标的函数;用热弹塑性梯度有限元方法对陶瓷-FGMs-金属典型的三明治板结构进行热机械分析。结果表明:FGMs组分布函数对其热应力分布有很大的影响,特别是在三明治结构的界面上,影响更为突出,这和现有文献的实验结果相符。     

民用飞机复合材料结构制造工艺变化的等效性验证

高性能复合材料已经大量应用于民用运输飞机结构,并以飞机主制造商协同供应商的方式进行复合材料飞机结构的制造。介绍了航空器适航审定对复合材料结构制造的适航要求,引出了复合材料结构制造工艺变化的等效性验证方法。目前,复合材料结构制造工艺变化的等效性验证是通过所制造复合材料物理的、化学和基本力学的性能试验,并对试验结果进行统计分析来实现的。最后提供了等效性验证的接受准则。所述内容,对国内民用飞机复合材料结构在不同供应商处制造以及制造过程中工艺变化如何满足航空器适航审定要求提供借鉴;对其它行业复合材料结构制造的质量控制也有借鉴意义。     

运输类飞机结构设计安全系数的探讨

中国民用航空规章运输类飞机适航标准25.303要求采用1.5的安全系数,该要求同其他相关适航条款,例如25.307"结构符合性的证明"、25.603"材料"、25.605"制造方法"、25.613"材料的强度性能和材料的设计值"等,共同保证了飞机结构的高可靠性。理论上,当材料、载荷、分析等方面的不确定性降低,采用低于1.5的安全系数可以保证结构具有同等的高可靠性;另一方面,当材料、载荷、分析等方面的不确定性大于目前适航规章所允许的水平,通过采用大于1.5的安全系数也可以保证结构具有等同的高可靠性。为了在民用运输类飞机的适航取证/审定过程中,在保证结构可靠性的前提下,能够根据具体情况适当调整结构安全系数,在综合研究中国民用航空规章第25部《运输类飞机适航标准》相关条款内在联系的基础上,探讨了载荷、材料性能、分析方法等不确定性对飞机结构安全系数的贡献。研究结果表明,目前1.5的飞机结构安全系数,用于考虑载荷、材料性能、分析方法等不确定性的系数分量分别为1.2、1.12、1.116.     

复合材料工艺的适航审定

阐述并解析了运输类飞机适航规章对结构制造方法的内在要求,介绍了复合材料工艺适航审查的流程、验证级别、验证所需考虑的要素,以及为表明对适航规章的符合性,复合材料工艺规范应包含的必要组成部分以及各部分的编制要求。